CAMP 0972 TRICAM EVO CLIMBING CAM

The CAMP Tricam Evo model directly improves traditional chock systems. This is because the brand immediately adds an extra chock position to this equipment. In particular, in addition to the active cam mode you directly use two different passive chock modes. In addition, with three different placement angles in total you instantly adapt to cracks. Indeed, you successfully place this equipment in horizontal cracks or in solution pockets.
 
Moreover, thanks to the wide design at the head you gain extra stability in cam mode. In fact, you fix the device securely in difficult rock formations. This way, you create safety compliant with the standards on traditional (trad) climbs. On the other hand, you control the equipment with special stiff-sewn slings. If you look closely, thanks to this stiff construction you place the chock directly into the crack with one hand within seconds.
 
That is, you remove the system back from the rock with the same ease using one hand. At the same time, with this extra layer of stitching you resist abrasion on sharp rock edges. In addition, with the equipment's size N.0.5 you instantly fit into cracks between 17 and 27 millimetres. In this way, with a weight of only 29 grams you completely protect the system from unnecessary loads.
 
Typically, traditional climbers really prefer this versatile use in operations. In short, you complete the placement properly at the narrowest points in the rock. Key Features Three Different Modes: You directly multiply the usage alternatives with one active cam and two passive chock positions . Stiff-Sewn Sling: With its special stitching construction you carry out one-handed placement and removal quickly . Difficult Crack Compatibility: You use the equipment in horizontal cracks and in solution pockets where other chocks do not fit . Extra Durability: With the thick sling you instantly prevent sharp edge abrasion . Wide Head: You add extra stability and balance to the system in the cam position . Applications Traditional (Trad) Rock Climbing Routes Advanced Alpinism and Mountaineering Activities Horizontal Crack and Solution Pocket Station Setups Intermediate Protection Point Duties on Technical Climbs Technical Details Product Code: 097205 (Size N.0.5) Weight: 29 grams (1.0 oz) Minimum Crack Range: 17 mm Maximum Crack Range: 27 mm Active Cam Strength (Cam 1): 8 kN Passive Chock Strength (Chock 2 & 3): 8 kN Certifications: Compliant with the EN 12270 Standards