CAMP 0923 / 0947 TRICAM DUAL-FUNCTION CLIMBING CAM

The CAMP Tricam model directly improves on traditional nut systems. This is because the brand designs this equipment with two different modes of use. In particular, you directly use the active cam mode and the passive chock mode. At the same time, you successfully place this equipment in horizontal cracks or solution pockets. Indeed, you fix the system securely to the rock face in shallow vertical cracks.
 
What is more, you instantly use this device at narrow points where other protection equipment does not fit. You can even easily place this nut in icy cracks instead of standard cam mechanisms. This way you create safety in accordance with the standards in traditional (trad) climbing. Stiff Sling and Use On the other hand, you control the equipment with special stiff sewn slings.
 
If you look closely, thanks to this stiff structure you place the nut directly into the crack with one hand within seconds. In other words, you remove the system from the rock again just as easily with one hand. At the same time, with this extra layer of stitching you resist abrasion on sharp rock edges. In addition, with the N.0.5 size of the equipment you instantly fit into cracks between 18 and 27 millimetres.
 
In this way, with a weight of only 30 grams you completely protect the system from unnecessary load. In general, experienced traditional climbers greatly prefer this versatile use in operations. In short, you complete the operation in accordance with the rules at the narrowest points on the rock. Key Features Dual Placement Mode: With one active cam and one passive chock position you directly multiply the use alternatives. Stiff Sewn Sling: With the special stitching structure you quickly place and remove it with one hand. Demanding Crack Compatibility: You use the equipment in horizontal cracks and in pockets where other nuts do not fit. Extra Durability: With the thick sling structure you instantly prevent friction on sharp edges. Icy Surface Support: You set up the system safely in icy cracks where standard devices do not work. Applications Traditional (Trad) Rock Climbing Routes Advanced Alpinism and Mountaineering Activities Station Setups in Horizontal Cracks and Solution Pockets Intermediate Protection Point Tasks in Technical Climbing Technical Details Product Code: 094705 (Size N.0.5) Weight: 30 grams (1.1 oz) Minimum Crack Range: 18 mm Maximum Crack Range: 27 mm Active Cam Strength (Cam 1): 9 kN Passive Chock Strength (Chock 2): 7 kN Certifications: Complies with EN 12270 Standards