PETZL VOLT WIND OFFSHORE Harness - International Version C072FB00

The VOLT WIND OFFSHORE is a fall arrest and work positioning harness with five attachment points, designed specifically for wind turbine technicians working in damp and salty environments. The FAST opening buckles allow you to put the harness on easily with both feet on the ground, while the DOUBLEBACK self-locking buckles allow quick adjustment.
 
It is designed to be comfortable, adjustable and supportive for work at height. The LADDER CLIMB ventral attachment point can be used to attach a vertical rail trolley and to move easily and comfortably along a rail or steel cable based fall protection system. The protective plates at the back of the shoulder straps and the waist belt help protect the straps against wear caused by friction while moving inside the wind turbine tower.
 
The equipment loops and gear holder slots allow the user to organise and carry all the equipment needed for the job in hand. The VOLT WIND OFFSHORE reduces wear of the straps thanks to the protective plates at the back of the shoulder straps and the waist belt and provides comfort while moving inside the wind turbine tower; it is also equipped with stainless steel buckles that provide greater durability over time for use in damp and salty environments Fast donning and non-slip easy adjustments: It can be put on quickly with both feet on the ground.
 
The waist belt, chest strap and leg loops are equipped with FAST opening buckles so they can be fastened and unfastened quickly and easily without loss of adjustment, even when wearing gloves. Adjusting the harness is comfortable and easy thanks to the DOUBLEBACK self-locking buckles on the shoulder straps and the waist belt. The anti-slip devices fitted to the DOUBLEBACK buckles help maintain the desired adjustment throughout the working day Comfortable construction and optimised adjustment system: Widely spaced shoulder straps reduce neck rubbing Contoured foam is used in all contact areas, including the shoulder straps, waist belt and leg loops, and is lined with breathable material, which makes working and moving more comfortable The sliding back straps are adjustable, providing greater freedom of movement and adapting to different body sizes The adjustable strap between the back plate and the waist belt ensures the harness is positioned correctly The semi-rigid waist belt and leg loops provide optimum support The leg loop foam can be repositioned for a perfect fit The elastic leg loop bands (user-replaceable, available as a spare part) ensure the harness maintains its correct adjustment while the user is walking or suspended LADDER CLIMB ventral attachment point: For progression along a vertical line or steel cable based fall protection system, it allows the trolley to be attached at the ventral position to provide better load distribution to the waist belt In the event of a fall, the attachment point automatically moves upwards to the sternal position and ensures the body stays in a vertical position after the fall Practical: Textile dorsal attachment point for attaching a retractable fall arrester Two textile slots on both sides for attaching a work seat to increase comfort while suspended The two side attachment points can be folded down when not in use to prevent accidental snagging The shoulder straps are equipped with a lanyard parking system for MGO hook carabiners The waist belt includes 5 equipment loops and 2 slots for a CARITOOL holder and a TOOLBAG bag for easily organising and carrying equipment throughout the working day In the event of a fall from the dorsal attachment point, a red indicator appears showing that the harness must be withdrawn from use Environmentally friendly design: the textile components contain at least 55% recycled material, corresponding to approximately 30% of the total weight of the harness (this calculation was made using the harness most representative of the VOLT series) Features LADDER CLIMB ventral attachment point: Attachment point for a positioning lanyard, descender or fall arrest trolley in single mode Side attachment points: Attachment points for a positioning lanyard for use in double mode Sternal attachment point: Attachment point for a fall arrest system Ventral attachment point: Attachment point for a fall arrest system Rear attachment point on the waist belt: Attachment point for a lanyard Certificate(s): CE EN 361, CE EN 358, CE EN 813, ANSI Z359.11, CSA Z259.10, GB 6095, JSFAD Material(s): Nylon, polyester, aluminium, stainless steel C072FB00 Colour(s): Black / Yellow Size: 0 Waist belt: 65 - 80 cm Leg loops: 44 - 59 cm User Height: 160 - 180 cm Weight: 2505 g Warranty: 3 years