CAMP JANUS PRO DOUBLE PULLEY WITH BEARINGS

The CAMP Janus Pro pulley offers high efficiency in complex block-and-tackle systems. In particular, you attach a full three carabiners at the same time to the main attachment point of the equipment. At the same time, with the wide becket point at the lower part you quickly create different station connections. Indeed, with the two secondary attachment points at the sides you carry out positioning operations very easily.
 
What is more, you instantly use these side points to attach progress capture systems. The Bearing System and Prusik Compatibility On the other hand, you operate the system flawlessly with thick ropes up to a maximum diameter of 16 millimetres. If you look closely, with the large 49 millimetre sheaves you successfully reduce the friction ratio and wear on ropes.
 
In other words, you safely add Prusik friction knots on both sides of both sheaves. At the same time, with its special asymmetric construction you completely prevent Prusik knots from jamming inside the pulley. In addition, you skilfully place the sealed ball bearings at the centre of the equipment. In this way you directly obtain a full 97% mechanical efficiency in intensive high speed operations.
 
Capacity and Standards Firstly, you produce the body and the sheaves of the equipment from lightweight but durable aluminium alloy. Then, with the stainless steel axle construction you directly resist rusting in demanding weather conditions. Ultimately, you always safely keep the maximum working load of the system at a level of 12 kN (3 kN x 4). Even so, in possible emergencies the equipment withstands a full 42 kN breaking strength flawlessly.
 
Despite its 425 gram body you even balance heavy industrial loads in the air very comfortably. . Key Features Sealed Ball Bearings: You provide 97% efficiency by eliminating friction in high speed and intensive operations. Multiple Attachment Points: You attach three carabiners to the main body and auxiliary systems to the lower and side points at the same time. Large Twin Sheaves: With the sheaves 49 mm in diameter you reduce wear on ropes to the lowest level. Prusik Compatibility: You set up automatically locking Prusik knots on both sheaves without jamming. Extra High Strength: With a 12 kN working load and 42 kN maximum breaking strength you safely finish heavy industrial operations. Applications Complex Block-and-Tackle and Heavy Load Lifting Systems Progress Capture System Setups High Speed and Intensive Industrial Rope Access Manoeuvres Advanced Search and Rescue (SAR) Operations Technical Details Product Code: 2161 Weight: 425 grams (15.0 oz) Maximum Rope Diameter: 16 mm Internal Sheave Diameter: 49 mm Maximum Working Load (WLL): 12 kN (3 kN x 4) Breaking Load: 42 kN Efficiency: 97% Mechanism: Sealed Ball Bearings Body and Sheave Material: Aluminium Alloy Axle Material: Stainless Steel Certifications: Fully Compliant with EN 12278 Standards