CAMP JANUS ALUMINIUM DOUBLE PULLEY

Design and Multiple Attachment Points The CAMP Janus pulley offers high efficiency in complex block-and-tackle systems. In particular, you attach a full three carabiners to the equipment's main attachment point at the same time. In addition, with the wide becket point at the bottom you quickly create different station connections. Indeed, with the two secondary attachment points on the sides you carry out positioning operations very easily.
 
Moreover, you instantly use these side points to attach progress capture systems. Twin Sheaves and Prusik Compatibility On the other hand, you run the system flawlessly with thick ropes of up to 16 millimetres in diameter. If you look closely, with the large 49 millimetre sheaves you successfully reduce the friction ratio and wear of the ropes.
 
That is, you safely add Prusik friction hitches to both sides of both sheaves. At the same time, with its special asymmetrical construction you completely prevent the Prusik hitches from jamming inside the pulley. In addition, with the self-lubricating brass bushing mechanism you carry out low-speed operations without any problems. In this way, you directly achieve 90% mechanical efficiency during operations.
 
Capacity and Standards First of all, the body and sheaves of the equipment are made from light but durable aluminium alloy. Then, with the stainless steel axle construction you directly resist rust in demanding weather conditions. Ultimately, you always safely keep the maximum working load of the system at 8 kN (2 kN x 4). Even so, in possible emergencies the equipment flawlessly withstands a full 38 kN breaking strength.
 
In fact, despite its 400 gram body you balance heavy industrial loads in the air very comfortably. Frankly, you trust this multi-functional twin pulley completely at the most complex anchor points. In the end, you always complete operations safely to the international EN 12278 standards. Key Features Multiple Attachment Points: You attach three carabiners to the main body and auxiliary systems to the lower and side points at the same time . Large Twin Sheaves: With the 49 mm diameter sheaves you reduce friction on the ropes to the lowest level . Prusik Compatibility: You set up self-locking Prusik hitches on both sheaves without jamming . Wide Rope Support: You use all thick dynamic and static ropes of up to 16 millimetres in diameter . High Breaking Strength: You complete operations safely with an 8 kN working load and a 38 kN maximum breaking strength . Applications Complex Block-and-Tackle and Heavy Load Lifting Systems Progress Capture System Setups Industrial Rope Access and Station (Anchor) Connections Advanced Search and Rescue (SAR) Operations Technical Details Product Code: 2160 Weight: 400 grams (14.1 oz) Maximum Rope Diameter: 16 mm Sheave Diameter: 49 mm Maximum Working Load (WLL): 8 kN (2 kN x 4) Breaking Load: 38 kN Efficiency: 90% Mechanism: Self-Lubricating Brass Bushings Body and Sheave Material: Aluminium Alloy Axle Material: Stainless Steel Certifications: Fully Compliant with the EN 12278 Standards