RVL-100+ Vertical Lifeline (with Shock Absorber on the Line)

• It is designed as fall arrest during descent and ascent on high ladders. • It is produced from hot dip galvanised steel material for long-term use in outdoor conditions. • The impact force that will occur during a fall is absorbed by the RA-50 Shock Absorbing Fall Arrester and it ensures the load coming onto the user is below 6 kN. • It has an indicator showing the tension of the lifeline. • The lifeline can be installed with a 15° inclination. • When the lifeline length is 10 metres and above it has a specially designed RC-30 V intermediate device system so that the steel cable is not damaged by the flexing that occurs with the wind. • The product is sold as a system, it is not sold piece by piece. • The ability to use it at temperatures down to -30°C • The possibility of 3 people using it at the same time Note: Only the SRG-1 A Steel Cable Grab must be used with this vertical lifeline.
 
The SRG-1 A Fall Arrester with a Shock Absorber moves up and down on the system and stops a fall by locking onto the lifeline. Length: 3 -... m (Production can be carried out according to the desired length.) Standard: EN 353-1:2014+A1:2017 Product Components • The RP-300 A Upper Anchor Plate • The RP-300B Lower Anchor Plate • The RA-50 Shock Absorber • The RL-100 Lifeline • The RC-30 V Intermediate Device • The RS-40 Tensioner & Indicator • The SRG-1 A Fall Arrester with a Shock Absorber