Petzl SPIN L1 Pulley P001BA

The SPIN L1 pulley, which can be opened even while attached to the station, is designed so that hauling and deviation systems and tyrolean (highline) lines can be set up with maximum ease. The large diameter sheave mounted on sealed ball bearings provides excellent efficiency. The swivel makes use easier by allowing the pulley to be oriented while under load and carabiners, ropes or slings to be attached directly.
 
Designed so that hauling and deviation systems and tyrolean (highline) lines can be set up with maximum ease during work at height, rescue and tree care: The moving side plate, which opens with three actions, can be opened and closed quickly and easily even with gloves The rope can be installed on the pulley attached to the station The red mark visible when the moving side plate is unlocked provides a visual warning The special side plate design protects the sections through which the rope passes Optimum efficiency and ease of use: A large diameter sheave mounted on sealed ball bearings for excellent efficiency The swivel allows the pulley to be oriented under load Up to three carabiners can be attached to the swivel at the same time and ropes and slings can be used to make manoeuvres easier Specifications Weight: 290 g Certification(s): CE EN 12278, NFPA 2500 Pulley General Use, UIAA Material(s): Aluminium, stainless steel, nylon Rope compatibility: 7 - 13 mm Sheave type: Sealed ball bearings Sheave diameter: 38 mm Maximum working load: 4 x 2 = 8 kN Breaking load: 36 kN Efficiency: 95% P001BA00: P001BA01 Colour(s): | Yellow | Black Warranty: | 3 years | 3 years