K-2010 A Permanent Horizontal Lifeline

• It is designed as an uninterrupted anchor (safe attachment) point in work carried out at height. • The K-2010 A Horizontal Lifeline has been tested for installation on wall, roof, floor and overhead structures and approved by a notified body. • The K-2010 A Horizontal Lifeline consists of the ANB-100 A Main Anchor, the ARB-100 A Intermediate Anchor, the EA-200 A Shock Absorber and the LL-200 A Lifeline set.
 
It has special anchor posts according to the area where it will be installed. • It has a Traveller that allows the user to pass the intermediate anchors without unclipping. • After taking an anchor (safety point) at any point on the lifeline with the Traveller, work is carried out remaining continuously secured on the line. • It has a shock absorbing system at the start and end of the system, so that the load coming onto the main anchor after a fall is brought down to a minimum. • The distance between two anchor points is a maximum of 25 metres. • Tension control can be carried out thanks to the spring tensioner indicator. • The line tension of the K-2010 A Horizontal Lifeline is achieved easily with the specially designed tensioning system. • The K-2010 A system components are manufactured from AISI 316 grade stainless steel.
 
It shows high resistance to corrosion in outdoor conditions. • The system is designed for the use of 8 people at the same time. • It has a shock absorber indicator system which deforms after a fall and serves as a "warning". • No special equipment is needed for its installation. As well as being carried out by our expert installation team, users can also carry out the installation themselves with training that can be taken if desired. • A special anchor plate design is made according to the area where it will be installed. • With its non-sparking feature it is an ideal solution in places with an explosion risk.
 
Dimensions: 5 - …. metres (Production can be carried out according to the desired length.) Standard: EN 795:2012 Type C, CEN/TS 16415:2013 Type C, EN ISO 80079-36:2016, EN 1127-1:2012 Product Components • ANB 100 A • ARB 100 A • ARB 100 A C1 • EA-200 AT • EA-200 AC • LL-200 A • SRY-50 • SRY-200