CT POSITIONING LANYARD POSITION LANYARD 5M

It is a Climbing Technology brand work positioning lanyard model. It is easy to use, adjustable and of compact construction. It is available in a total of 3 different lengths: 2m, 3m and 5m. It can be connected to the side attachment points (EN 358) of a full body harness. It is suitable for use when climbing poles or for positioning on poles.
 
It can be connected to the front attachment point (EN 813) of the harness for positioning on sloping surfaces with no pendulum risk. It has an adjuster that allows the rope to slide comfortably without breaking. When the rope is released it locks in position. In this way it allows the rope to be recovered or released easily even under tension. The cam section: it has a wide diameter and smooth surface that protects the rope against abrasion and wear and allows the device to be used for a long time.
 
It is safe and easy to use. There are no protruding parts on the product. In this way it prevents the danger of swinging caused by accidental contact. EN 358:1999: Personal protective equipment for work positioning and prevention of falls from a height - Work positioning belts and restraints It is CE certified. Country of Origin: Italy Length / Weight: 2m (920 g.) / 3m (1000 g.) / 5m (1160 g.) It has a large terminal carabiner produced from steel material with a 50 mm opening.
 
The technical information for the carabiner on the cam on the rope (2C46300WBC) is stated below. Dimensions: 111 x 62 mm Closed Strength: 24 kN Open Strength: 10 kN Minor axis strength: 7 kN Weight: 75 g. Gate opening: 21 mm EN 12275:2013-B: This standard covers the safety rules and test methods for the use of connectors (carabiners) in mountaineering involving climbing.
 
EN 362:2004-B: Personal protective equipment against falls from a height and connectors. It is CE certified. UIAA (International Climbing and Mountaineering Federation)